67
D. Scan
You may choose the most suitable auto-run function among the various patterns given by
this camera. When engaged, camera will move, in clockwise direction, from one preset to
the next until stop is called.
Auto Pan
3 sub-items:
Pan / Tilt
To do continuous pan/tilt between two positions A and B. Complete the settings of
start position, end position, moving speed and dwell first.
Select START, move to the position, and then click
to set position A.
Select END, move to the position, and then click
to set position B.
Pan Only
This is for continuous panning between two spots A/B
without changing the vertical
position of lens.
Select START, move to the position, and then click
to set position A.
Select END, move to the position, and then click
to set position B.
Circle
To perform continuous panning in 360
o
. You need to choose the start point and
panning speed.
Select TILT LEVEL, move to the position, and then click
to set the position.
All Preset
To make camera move around all the presets
stored in this camera. Set up the speed and
dwell, then start running the scan with RUN command on list.
Group Scan
To make camera move around all the presets stored in this camera.
