60
reduce red a little; If lighting is fluorescent or within white spectrum, try to
add more red or reduce the blue.
Default values are 29 for RED, 41 for BLUE; we suggest you not to give
setting away from these two default numbers by too much.
Back Light
Backlight function is for improving the image quality in the scene that strong light
source stays behind the object, which usually will wash out
“Saturate” the image considerably.
This camera works on single time exposure. When
backlight function is engaged, it reduces exposure time
and video gain (if necessary) to avoid over- exposure.
You are suggested to make tests with all the options in list
on site, in order to make correct setting and final choice.
WDR:
WDR is a special BLC used for one scene that has part in high light and
other part is much darker.
WDR makes two exposures for one image. When this function is
engaged, the CCD will make the 1st exposure at high speed (1/6,000 or
1/10,000 sec) to form an image of less
brightness. The next shot is at normal speed
(1/50 or 1/60), to form an image of more
brightness. The two then are superimposed
into one picture, on which dark is in normal
brightness and brighter part is dimmed, and
finally delivers image of better contrast for
shot in extreme contrast condition.
Motion DET
Not an available function for this camera.
Focus
Focusing is one of the most important and frequently-used functions of a zoom
camera. This camera offers 3 focusing modes, each can be in-tracking or not with the
zoom control.
See “Focus Action vs. Settings” table on following page to know what focus function
will react to different control or movement in each mode.
Main Setup
WHITE BAL AWC
SET
BACKLIGHT BLC
●
`
●
EXIT
use left-right buttons
to alter options on
display
Main Setup
WHITE BAL AWC
SET
BACKLIGHT WDR
●
`
●
EXIT
use left-right buttons
to alter options on
display
