10
I/O wires – used in application, for e.g., motion detection, event triggering, alarm
notifications. It provides the interface to:
2 sets of Digital Input (Digital In + GND) – The digital inputs for connecting devices
that can toggle between an open and closed circuit, such as PIRs, door/window
contacts, glass break detectors, etc. When a signal is received the status changes
and the input becomes active.
2 sets of Relay Output (N.O. + COM) –The output to Relay switch of the alarm
device such as LEDs, Sirens, etc.
Digital Input (Alarm Input)
GND (Ground):
Initial status is LOW.
Digital In:
Max. 50mA, 12VDC.
Digital IN 1
Digital IN 2
Relay OUT 2
Relay OUT 1
Door/Window
Contacts
