If the shelf (13) and drawer (14) are not aligned
at the front (d≠0), first completely pull out the
drawer to access the drawer opening
mechanism on the back wall. Press on the
spacer (A) to release the mechanism. Rotate
the spacer to adjust the length.
Situation "a": rotate the spacer in anti-clockwise
direction (1). Compared to the initial state, the
spacer moves outward relative to the drawer,
i.e. it is extended. When you push the drawer
back into the appliance (2), the drawer will be
positioned slightly more to the front of the
appliance (3).
Situation "b": rotate the spacer in clockwise
direction (1). Relative to the initial state, the
spacer moves toward the drawer, i.e. it is
shortened. When you push the drawer back
into the appliance (2), the drawer will be
positioned slightly more to the back of the
appliance (3).
Repeat the process until the shelf and the
drawer are flush at the front (d=0) – situation
"c".
INFORMATION!
Before you start adding accessories to the drawer, check once more whether the drawer is
correctly placed on the telescopic rails.
Charcoal filter (10)
Fresh air is drawn into the appliance interior through active charcoal air filters. This ensures freshness,
as well as absence of dust and odours. The fans then distribute the air evenly across the appliance
interior.
Replace the air filters approximately every 12 months. A message will appear on the touch screen
TFT display and in the
ConnectLife
mobile app to remind you it is time to replace the filters.
To replace the air filter:
1. Rotate the filter in the anti-clockwise
direction (1) and pull it out from the
appliance.
2. Insert a new filter into the filter slot and
rotate it clockwise until it clicks into place.
28
Description of the appliance
