Asko TL751 XXLT, Service Manual

Page: 22 / 61

21
4) Temp
A. If you press this button, the following is displayed in order.
Medium - Mid High - High - Ultra Low - Low - Medium
B. Each level targets temperatures as follows.
C. This is available only in Manual Dry Course not Sensor Dry Course.
5) Dry Time
A. If you press this button, the following is displayed in order.
40 - 50 - 60 - 20 - 30 - 40
B. Pushing More Time or Less Time button increases or decreases time by a minute. The maximum
drying time is 1 hour and 50 minutes and minimum 10 minutes (the indicated time includes 5 minutes
of cooling).
C.If you select Dry Time, Dry Sensor and Course LED go off. That is, you can not choose Dry Sensor and
Course but only temperatures (default is High).
D. 5 levels of temperatures are av ailable.
6) Signal
A. If you press this button, the following is displayed in order.
'High -
▼
- Low -
▼
- Off'
B. Then, the volume of the beeper changes.
C. You can not change the beeper while the unit is in operation or stops temporarily.
7) More Time
A. Pressing this button increases time by a minute.
B. The time increases up to 1:55 (minutes)
C. You can change time in Manual Dry Course and Time Selection. Also Anti-crease can be
selected/cancelled.
Level
High
Mid High
Medium
Low
Ultra Low
Heater-Off(°C)
63
59
52
48
40
Heater-On(°C)
56
52
45
41
33
Target Temperatures