Asko TDC33, Service Manual

Page: 56 / 86

54
SERVICE
2
1
2,3
Changing the hinge socket
1. Remove the three screws that secure the lo-
wer hinge and twisting it free, take off the
front door.
2. Change the hinge socket.
3. Hang the front door back on with the aid of
the door magnet and secure the hinge.
Changing the door magnet/escutcheon plate
1. Half unscrew the screws in the side of the front
door.
2. Door magnet: Push the door magnet up-
wards and pull it outwards.
3. Escutcheon plate: Press the plate down and
pull it outwards.
4. Install a new magnet/escutcheon plate and
tighten the screws.
Changing the handle
1. Remove the three screws that secure the lo-
wer hinge and twist it free, lift off the front
door.
2. Unscrew the 3 screws that secure the handle
to the front door.
3. Offer up the new handle.
4. Secure the handle with the 3 screws.
5. Put the front door back on, keep it in posi-
tion with the aid of the door magnet, and se-
cure the hinge.
2