Asko TDC33, Service Manual

Page: 4 / 86

TABLE OF CONTENTS
2
Safety regulations 5
Specifications 6
The drying process 7
TDC33 7
TDC44 8
Installation 9
Tumble drier location 9
Location alternatives: 9
Adjusting the feet 11
Condensation water (TDC44) 11
Air extraction (TDC33) 12
Connection to the tumble drier 12
Connection to exhaust duct 12
Examples of installations 12
Installation in warm climates 13
Condensation problems 13
Electrical installation 14
Doorhanging 15
Left hanging to right hanging 15
Right hanging to left hanging 17
Fault tracing 19
Problems 21
Components and measurements 22
Test program and fault indications 26
Test program 26
Internal counter 26
Fault indications 26
Consumption values 27
TDC33 27
TDC44 28
Tools 29
List of tools 29
Application areas 30
Special tools 32
Service 33
Top cover 33
Removing the top cover 33
Installing the top cover 33
Changing the guides 33
Removing the rear panel 34
Installing the rear panel 34
Removing the inner and outer rear
panels
35
Installing the inner and outer rear
panels
35
Changing the foam rubber seal 36
Changing the bearing 36
Changing the rear felt strip seal 37
Changing/cleaning the heating element 37
Changing the overheating protection
device
38
Input terminal block 39
Removing the input terminal block 39
Installing the input terminal block 39
Removing the radio interference filter 40
Installing the radio interference filter 40
Contactor 41
Removing the contactor 41
Installing the contactor 41
Fuse 42
Changing the fuse 42
Changing the fuse holder/insert 42
Drum 43
Removing the drum 43
Installing the drum 43
Changing the drive belt 43
Changing the drum ridge 44
External fan housing (TDC44) 45
Removing the external fan housing 45
Installing the external fan housing 45
Cleaning the external fan wheel 45
Motor 46
Removing the motor 46
Installing the motor 46
Changing the capacitor 47
Air extraction system 48
Removing the exhaust air duct hook 48
Installing exhaust air duct hook 48
Removing the exhaust air duct T-piece 48
Installing the exhaust air duct T-piece
48
Humidity sensor 49
Removing the humidity sensor 49
Installing humidity sensor 49
Thermistor 50
Removing the thermistor 50
Installing the thermistor 50
Front frame 51
Removing the front frame 51
Installing the front frame 51
Changing the front felt seal 52
Changing the support roller 52