Asko TDC33, Service Manual

Page: 11 / 86

9
INSTALLATION
A
B
C
min
600
min
850
120
103
140
135
INSTALLATION
TUMBLE DRIER LOCATION
TDC44
The tumble drier can be free-standing, built in or
part of a tower. Remember that the tumble drier
produces heat, and should therefore not be pla-
ced in too confined a space. If the tumble drier is
put into a very small room, because of the limi-
ted amount of air, the drying process will take
longer.
NOTE
To improve the air circulation, leave the door le-
ading into the room where the tumble drier is
placed open.
WARNING
The electrical installation must be carried out by
a qualified tradesman.
LOCATION ALTERNATIVES:
A. Free-standing
The tumble drier can be placed on the floor, either
on its own or up against a wall or cupboard.
B. Built-in
The tumble drier can be built in under a work
top with a minimum working height of 850 mm.
The width of the opening must be at least 600
mm.
C. Washing tower
The tumble drier can be placed on top of an ASKO
washing machine. The tumble drier is fastened
securely and prevented from moving by the to-
wer fasteners that come with the machine:
2 off angle pieces.
2 off plastic cups.
A pull-out worktop is available as an accessory
(Part no. 80 619 07-0 - white, 80 619 07-26 -
black), available for purchase from your local
ASKO dealer. A mounting kit for decor frame
(Art. no. 80 639 81) is available for purchase from
your local ASKO dealer.