Asko TDC33, Service Manual

Page: 22 / 86

20
FAULT TRACING
bottom water container is full, because the pump
or hoses are blocked or faulty. If the condensate
water is pumped straight out via the drain hose -
check that the hose is not kinked or blocked.
Other possible reasons:
Condenser water pump is blocked or burned out.
If the pump is burned out an associated fault will
be burned wiring in the control unit. Always check
first if the condenser water pump has burned out
before installing a new control unit.
See service bulletin Group 22 Number 21.
DISPLAY
Incorrect language on the display
If for some reason the language on the display has
changed, you can go back to the original langua-
ge.
Earlier models had two versions of the machine
(Alternatives 1 and 2) but now all eleven langua-
ges are present in all machines.
Alternative 1: The languages you can choose
from are Danish, Finnish, French, Dutch, Nor-
wegian and Swedish.
Alternative 2: The languages you can choose
from are English, French, Italian, Portuguese, Spa-
nish and German.
To change the language, do this:
Switch off the mains power button, , and
press it again to restart the machine.
Press the
P8
button five times, then press the
P1
button five times. These 10 button presses
must be done within 15 seconds.
Within 3 seconds of last pressing the
P1
but-
ton, use the
P6 P7
buttons to step through to
the language you want.
The display is black
Check the overheating protection.
See Fault tracing ”Overheating protection”.
The display is lighting when a programme is
selected, but no characters or digits are
shown
No characters or digits are shown on the display
when a locked programme is selected.
To unlock a programme, see Changing set-
tings.
PROBLEMS IF THE PROGRAM UNIT IS CHANGED
If the program unit is changed, check if the jum-
per is cut correctly. Cut J1 on TDC44. Do
not
cut J2!