Component description
Personal notes
Door switch
The door switch is located in a holder in the
middle of the front support and is activated by
a pin in the front door. The switch is normally
open and closes when the door is closed. If the
front door is opened during operation the CU
stops the drying programme. The programme
starts from the beginning if restarted.
Purpose:
To prevent the machine from running
while the door is open.
Drying motor
The motor is at the bottom and drives the
impeller that is directly fitted to the shaft
journal. The motor is a unit with a belt
tensioner and springs and drives the drying
drum via a poly V-belt.
Purpose:
To drive the impeller and drum during
the drying process.
Drainage pump (condenser dryer)
The drainage pump is located in the lower
condensed water container. The condensed
water is pumped to the condensed water
container or directly to the drain. When a
drying programme is running, the drainage
pump is activated constantly in cycles of 30
seconds ON and 210 seconds OFF.
Purpose:
To pump condensed water to the
condensed water container or the drain.
Light
Certain machines have an internal light
that is activated when the door is opened.
LED technology is used to improve energy
efficiency.
Service Manual TD70.C
12
