Service manual DW Outdoor
21
Service menu
Menu step/Turn/Push
LCD
Comments/instructions
Variant
PROG
U:1
Variant 1, default setting (Temperature, Drying)
U:2
Variant 2 (Temperature, Drying, Delayed start)
U:3
Variant 3 (Temperature, Drying, Delayed start, Time program)
U:4
Variant 4 (Temperature, Drying, Delayed start, Time saver)
START
Region
PROG
EU
Region Europe, default setting
US
Region USA
AU
Region Australia
START
Fan sequence
PROG
Y:0
No fan sequence during program. Dries the load.
Y:1
Fan works in sequence during the wash cycle, not in normal program,
default setting
Y:2
Fan works in sequence during the wash cycle, even during normal
program
START
TDE & HWC
PROG
A:0
Turbo Drying Express and Heating Water Circuit off, default
setting
A:1
Turbo Drying Express on (Quick). Uses both hot water system
and electrical energy to minimize program time.
A:2
Heating Water Circuit on (ECO). Uses hot water system as
far as possible, aided by electrical energy, to minimize energy
consumption.
START
Super rinse
PROG
S:0
Super rinse off, default setting
S:1
Super rinse on. Adds two extra rinses.
START
Total reset
PROG
r:0
No total reset next time T2 is pressed, default setting
r:1
Total reset next time T2 is pressed. Should be done after replacing
the control unit to reset all the sensors.
START
T8
T1
LCD1
T3
T4
T5
T6
T7
T2
D1, I5,
D2, D3
Variant 1
Variant 2
Variant 3
Variant 4
