15
CONNECTION TO FLOOR DRAIN
The drying cabinet is supplied from the factory with a hose to the detachable water
tank.
To change to removal of condensation water to the
fl
oor drain, proceed as follows:
1
Carefully pull the upper part of the hose
out around 2-3cm.
2
Trim the hose in the middle of the
opening.
3
Install the new drain hose with the nipple
supplied in the assembly kit as illustrated.
Push the hose on without hose clips.
4
Position the drain hose in one of the
recesses in the sheet metal so that there
is no risk of the hose being crushed.
Cabinet viewed from rear
Position the drain
hose in one of the
recesses in the
sheet metal
Hose to the
detachable
water tank
Hose from
condensa-
tion water
pump
New hose to
drain
Nipple
Trimmed
hose from
condensation
water pump
859149au_en.indd 15
859149au_en.indd 15
17. 02. 2022 08:51:19
17. 02. 2022 08:51:19
