24
■
END OF PROGRAM
When the cool-down period has ended, the drying process is
fi
nished, and the
display shows the text
“end”
(
fl
ashing).
When the
START/STOP
button is then pressed, the current program ends and the
display shows the last used program.
PLEASE NOTE
In standby mode the display goes o
ff
after 10 minutes and lights up when
any of the buttons on the control panel
is activated or the door is opened.
PLEASE NOTE
Empty the condensation water tank
after each drying process.
ENDING DRYING PROGRAM
To interrupt a drying process in progress, press
START/STOP.
DOOR OPENED
If the door is opened while the drying process is in progress, the drying process will
continue for another 5 minutes. The display shows
“close door”
and counts down
the 5 minute program pause period.
If the door is closed within this 5 minute period, the drying process will continue.
If the door is left open, the drying process will stop after 5 minutes and must be
restarted manually.
If you wish to stop the drying process immediately, without a 5 minute period, press
START/STOP.
859149au_en.indd 24
859149au_en.indd 24
17. 02. 2022 08:51:25
17. 02. 2022 08:51:25
