32
LIST OF ERROR CODES
Describes relevant error codes for this product.
No.
Name
Description
ERROR 03
Fault on moisture
sensor
Sensor is outside its measurement
range.
Contact Service.
ERROR 04
Max time process
Max time for drying process exceeded
(pre-set value 240min can be changed
with parameter P 2073).
ERROR 06
Check water pump
Water level in tray too high, has activated
switch at
fl
oat.
Contact Service.
ERROR 12
Timeout
communication
The communication between user
interface and electronics has been
temporarily interrupted.
Contact Service.
To reset the alarm, hold down the
START/STOP
button for 5 sec.
859149au_en.indd 32
859149au_en.indd 32
17. 02. 2022 08:51:31
17. 02. 2022 08:51:31
