26
+
p105
ZK
VK
+
Setting to optimise the drying cabinet’s automatic program is done using the
buttons on the control panel when the drying cabinet is in
programming mode
.
RETURN TO OPERATING MODE
To return to operating mode, press
DOWN ARROW
and then
OK.
PROCEDURE
1
Step through to the relevant parameter by pressing the
UP ARROW
or
DOWN
ARROW
key repeatedly. If you go too far, simply continue stepping through until
the display shows the correct parameter.
2
When the display shows the correct parameter, for example
“P 2072”
, press
OK
to
con
fi
rm parameter selection. The row now
fl
ashes with the set value of the parameter.
3
Increase or reduce the parameter value using the
UP ARROW
or
DOWN
ARROW
key.
4
To save the set value, press
OK.
PROGRAMMING MODE
■
Make sure that the main
ON/OFF
switch on the drying cabinet is turned o
ff
.
The display is unlit.
■
Hold down the
UP
ARROW
and
DOWN ARROW
buttons
simultaneously
and press the
ON/OFF
switch. The display lights up and shows the
fi
rst setting
parameter according to the list below.
859149au_en.indd 26
859149au_en.indd 26
17. 02. 2022 08:51:25
17. 02. 2022 08:51:25