29
PROCEDURE
The setting parameters according to the list on pages 27 are shown on the display as follows:
on
the
top row
of the display the relevant parameter is shown, for example P 2014,
on
the
bottom row
the set value of the parameter is shown.
1
Go to programming mode. See page 26.
2
Browse to the relevant parameter by pressing the
ARROW UP
or
ARROW DOWN
key
repeatedly. If you go too far, simply continue browsing until the display shows the correct
parameter.
3
When the display shows the correct parameter, for example
”
P 2012”
, press
OK
to confi rm.
The row now fl ashes with the set value of the parameter.
4
Increase or reduce the value using the
ARROW UP
or
ARROW DOWN
key.
5
To save the set value, press
OK.
6
To return to operating mode, press
DOWN ARROW
and then
STOP.
RESTORING TO FACTORY SETTING
1
Go
to
programming mode
as described on page 26.
2
Hold down the
UP ARROW
and
DOWN ARROW
keys simultaneously and press
OK.
The factory settings are saved and the display shows the last run programme.
