14
13
15
New hinge
Raise the cabinet
19
Raise the cabinet and place it in
position and
secure the cabinet
to the wall.
Transfer the door handle
18
Transfer the handle
(14)
to the other side.
Fit the cover plugs for the old holes by hand.
Cover plugs are supplied in the assembly kit.
14
Introduce the operating ca-
ble through the recess in the
new upper hinge and slide
the door up on the hinge pin.
15
Install
the
lower hinge pin
.
Make sure that the hinge
pin is tightened
fi
rmly.
16
Connect the control panel
(13)
to the connector in
the upper part of the drying
cabinet.
17
Refi t the drying cabinet cover
which was removed under 1.
Fan unit
The control cable
must be pulled
through the hole.
Lay the door in position
_____________________________
CAUTION
The drying cabinet must not be used
without being attached to a wall owing to
the risk of tipping over forward.
____________________________________
