12
9
10
11
14
9
Lay the door down
with the inside facing
up on a non-damag-
ing surface.
10
Detach the inner plate
(9)
with
magnetic
strip, door hangers
and
glove hangers
.
Screws are beneath
the magnetic strips.
Remove the insula-
tion
(10).
11
Detach and transfer the
reinforce-
ment panel and
lower hinge
bushing (11)
in the door to the
opposite side.
12
Detach existing control cable from
control panel and pull cable out
with hinge bushing
(12).
Discard
the cable as there is a new com-
plete cable in the rehanging kit.
Fit the new cable on the opposite
side - press the bushing fi rmly into
the hole and connect the cable to
the control panel outlet.
13
Move back the
insulation
and
inner plate
with
magnetic strips
and, if applicable,
hangers.
Re-attachment in the door
