25
TIPS
If you have made a mistake or are unsure where you are, you can always press
ON/OFF
and start selecting drying programme again.
If the door is open when a drying programme is started and the
OK
button is activated,
the display will show “close door”.
Close the door, and the selected drying programme will
start.
The
animated symbol
(bar) on the left side of the display indicates that the drying process
is in progress.
When the drying process has fi nished, the display shows the text
“end”
(fl ashing). When
the
STOP
button is then pressed, or the door is opened, the current programme ends and
the display shows the last used programme.
NB: In standby mode the display goes off after 15 minutes and lights up when
any of the buttons on the control panel is activated or the door is opened.
To halt a drying process in progress, press
STOP.
If the door is opened while the drying process is in progress, the fan will continue operat-
ing for another 5 minutes. The display shows
“close door”
and counts down the 5 minute
programme pause period.
If the door is closed within this 5 minute period, the drying process will re-start.
If the door is left open, the drying process will stop after 5 minutes and must be restarted
manually.
If you wish to stop the drying process immediately, without a 5 minute period, press
STOP.
