19
Note: Authentication methods supported by WPS are: Open system, WPA-Personal
and WPA2-Personal. Not supported methods are: Shared Key, WPA-Enterprise,
WPA2-Enterprise and RADIUS.
4.
Connection Status
愪
The connection status of WPS.
5.
Configured: The configured status of WPS.
6.
AP PIN Code: Key in the router's PIN code in the client's WPS utility and
configure the network name and security settings.
7.
WPS Method: Selects the method to per PIN (Personal Information Number)
method requires a PIN number to establish a wireless connection. PBC (Push
Button Configuration) method requires you to push a button (the Start button on
this page or a physical WPS button) to establish a wireless connection.
8.
PIN Code: The WPS PIN code which clients use to connect with the router.
9.
In the WPS Method field, select Push Button or Client PIN code. If you select
Push Button, go to step 10. If you select Client PIN code, go to step 11.
10.
To set up WPS using the router’s WPS button, follow these steps:
a)
Click Start or press the WPS button found at the rear of the wireless router.
b)
Press the WPS button on your wireless device. This is normally identified
by the WPS logo.
NOTE: Check the wireless router or its user manual for the location of the WPS
button.
11.
To set up WPS using the Client’s PIN code, follow these steps:
a)
Locate the WPS PIN code on your wireless device’s user manual or on the
device itself.
b)
Key in the Client PIN code on the text box.
c)
Click Start to put your wireless router into WPS survey mode. The router’s
LED indicators quickly flash three times until the WPS setup is completed.
12.
Click Start.
Summary of Contents for RAC2V1K
Page 1: ...Wireless Router User Manual ...
Page 114: ...113 ...
