65
2.
Connection Type: Select IPv6 connection type to configure Disable, Native,
Static IPv6.
3.
DHCP-PD:
Dhcpv6 prefix delegation.
4.
WAN IPv6 Address: Set the wan interface’s ipv6 address.
5.
WAN Prefix Length: Set the wan interface’s ipv6 prefix length.
6.
WAN IPv6 Gateway: Set the wan interface’s ipv6 gateway
7.
WAN IPv6 MTU: Set the WAN interface’s IPv6 MTU (Maximum Transmission
Unit).
8.
User Class Option: The user class option (15) of ORO that DHCPv6 clients send
to the DHCPv6 server by solicit message.
9.
Auto Configuration: The wan interface’s address assign type (SLAAC). Enable:
WAN interface can get ipv6 address by SLAAC. Disable: WAN interface gets the
ipv6 address only by stateful.
10.
Enable LAN: Enable/Disable router allocating IPv6 addresses for lan-side
devices.
11.
Simultaneous:
The mode which hosts connected to the LAN interface can get
IPv6 addresses. When enabled, hosts get IPv6 address by simultaneous Stateless
and/or Stateful (requires DHCP pool start and end values). When disabled, hosts
do not get IPv6 addresses simultaneously by Stateless and/or Stateful, and a mode
must be selected instead.
12.
LAN IPv6 Address:
Set LAN interface’s IPv6 address.
13.
LAN Prefix Length:
Set LAN interface’s IPv6 prefix length.
14.
LAN IPv6 Prefix: Set LAN interface’s prefix.
15.
Enable Pool Setting For Lan Host: Enable/Disable allocating ranged IPv6
addresses for lan-side devices.
16.
DHCP Pool Start: DHCPv6 address setting address pool start.
17.
DHCP Pool End: DHCPv6 address setting address pool end.
18.
PD-Valid Lifetime:
Prefix delegation for valid lifetime.
19.
PD-Preferred Lifetime: Prefix delegation for preferred lifetime.
20.
LAN IPv6 MTU: Set MTU for lan-side devices.
21.
Connect to DNS Server Automatically: Choose to get the DNS from manually
from uplink.
Summary of Contents for RAC2V1K
Page 1: ...Wireless Router User Manual ...
Page 114: ...113 ...
