56
WPA-Enterprise, WPA2-Enterprise, and RADIUS encryption method
4.
Connection Status: The connection status of WPS.
5.
Configured: The configured status of WPS.
6.
AP PIN Code: This is your router’s WPS PIN code. Enter this in the client's WPS
utility to make a connection.
7.
WPS Method: PIN (Personal Information Number) method requires you to enter
a PIN number to establish a wireless connection. PBC (Push Button
Configuration) method requires you to push a button (the Start button on this
page or a physical WPS button) to establish a wireless connection.
8.
To set up WPS using the router’s WPS button:
a)
Click Start or press the WPS button found at the rear of the wireless router.
b)
Press the WPS button on your wireless device. This is normally identified by
the WPS logo.
NOTE: Check your wireless device or its user manual for the location of the WPS
button.
9.
To set up WPS using the Client’s PIN code:
a)
Locate the WPS PIN code on your wireless device’s user manual or on the
device itself.
b)
Key in the Client PIN code on the text box.
c)
Click Start to put your wireless router into WPS survey mode. The router’s
LED indicators quickly flash three times until the WPS setup is completed.
10.
PIN Code: The WPS PIN code for clients to connect using PIN method.
11.
When done,
click Start.
Summary of Contents for RAC2V1K
Page 1: ...Wireless Router User Manual ...
Page 114: ...113 ...
