120
Steps to set operating mode:
1.
From the navigation panel, go to Root > Operation Mode
2.
Select the mode that you want the router to run.
3.
Click Apply.
3
.
4.1 Wireless Router Mode
In wireless router mode, the router connects to the Internet via PPPoE, DHCP, PPTP,
L2TP or Static IP and shares the wireless network to LAN clients or devices. In this
mode, NAT, firewall, and DHCP server are enabled by default. UPnP and Dynamic
DNS are supported for SOHO and home users. Select this mode if you are a first-time
user or you are not currently using any wired/wireless routers. Select the wireless
router mode, and click Apply to jump to the wizard page, then refer to 1 wizard setup
for normal user setup.
3.4
.
2 Access Point Mode
In Access Point (AP) mode, your device connects to a wireless router through an
Ethernet cable to extend the wireless signal coverage to other network clients. In this
mode the firewall, IP sharing and NAT functions are disabled by default.
Summary of Contents for RAC2V1K
Page 1: ...Wireless Router User Manual ...
Page 114: ...113 ...
