ashtech Z-FX, Operation And Reference Manual

Page: 60 / 94

48 Z-Surveyor & Z-FX Operation Manual
STATIC
• SITE (SITE:****)
Sets the four character SITE name.
• Antenna Height (ANT HT:**.****m)
Sets the height of the GPS antenna
• Survey Status (STATUS)
STATUS
is a submenu with the information described in Table 4.3:
KINEMATIC
• SITE (SITE:****)
Sets the four character SITE name.
• Epoch Log counter (LOG #:***)
If the epoch counter in the SURVCONF menu has been set to a value
other than 0 and the SITE has been entered (which must be done after
the user has set the antenna on the desired point), the display enters the
LOG # screen and the log counter begins decrementing starting from the
Table 4.3: Survey Status Information
Menu Item Description Description
Current Position LAT:N/S**º**’**.*****”
LON:E/W***º**’**.*****”
ALT:*****.**m The position displayed is the autonomous
position or the RTCM code differential
position, but not the RTK or CPD position.
Position Dilution
of Precision PDOP: **.* Displays PDOP of current constellation used
for position solution.
#Satellites
recorded (on L1
and L2) #USED: ** Number of satellites being recorded on
PCMCIA card (healthy and above the
recording elevation mask).
Time CNT/GPS/UTC **:**:** Displays current time. Table 4.4 describes the
different types of time the receiver can
display.
Table 4.4: Time Displays
Time Description
CNT Time of the receiver’s internal clock. Displayed until receiver locks to first
satellite.
GPS Time displayed after receiver locks to first satellite.
UTC Time displayed after receiver collects UTC corrections from satellite.