ashtech Z-FX, Operation And Reference Manual

Page: 73 / 94

Operations 61
O
p
erat
ion
s
d. Press
↓
<2 seconds to place receiver in edit mode.
e. Press
↑
or
↓
<2 seconds to scroll through possible characters for SITE
1st character (or press
↑
or
↓
>2 seconds to scroll faster, then release
when reaching the desired character).
f. Press
↑
+
↓
<2 seconds to accept the selected SITE character (pressing
↑
+
↓
>2 seconds cancels the parameter setting).
g. Repeat steps e and f until all four SITE characters have been selected.
The entered SITE will scroll by for visual confirmation.
4. Measure the antenna height.
Enter antenna height into receiver via
SURVEY:STATIC
submenu (refer to
Figure 4.1).
This antenna height should be determined using the method described in “
MEASURING
ANTENNA HEIGHT”
on page 59.
a. From the main menu, press
↑
<2 seconds until
SURVEY:STATIC
is
selected.
b. With
SURVEY:STATIC
selected, press
↓
>2 seconds to enter the submenu.
c. Within the
SURVEY:STATIC
submenu, press
↑
< 2 seconds repeatedly
until
ANT HT
is selected.
d. Press
↓
<2 seconds to place receiver in edit mode.
e. Press
↑
or
↓
<2 seconds to scroll through possible numbers for antenna
height values.
f. Press
↑
+
↓
<2 seconds to accept the selected antenna height 1st digit
(pressing
↑
+
↓
>2 seconds cancels the parameter setting).
g. Repeat steps e and f until all digits have been selected. The entered
antenna height will scroll by for visual confirmation.
5. Enter Record Interval.
This step is only required if the default value is not acceptable. It is important that all receivers
participating in the survey sample at the common record interval.
Enter Record Interval into receiver via
SURVCONF
submenu (refer to Figure
4.1).
a. From the main menu, press
↑
<2 seconds until
SURVCONF
is selected.
b. With
SURVCONF
selected, press
↓
>2 seconds to enter the submenu.
c. Within the
SURVCONF
submenu, press
↑
< 2 seconds repeatedly until
REC
INT
is selected.