Engl
ish
3
•
Connect the output cable
[5]
of the AC adapter to the
docking station.
•
Insert the battery
[6]
vertically, label inwards, into the slot
located at the back of the docking station.The light
indicator
[7]
turns red, meaning the battery is being
charged.
•
When the light indicator
[7]
turns green, this means the
battery is fully charged and you can remove it from the
docking station.
Inserting the
Battery Into the
Receiver
When the battery has been charged, do the following:
•
Turn over the receiver and rotate the finger screw counter-
clockwise a quarter turn and pull the trap door open.
•
Insert the battery as shown. The label must be outwards
and the right way up.
•
Put the trap door back into place by first inserting the two
clips located at the top of the trap door.
•
Then push the door against the case and rotate the finger
screw clockwise by one-quarter turn for a secure and
sealed closure.
Turning the
Receiver On
Press the Power button
[8]
until the screen lights up.
Then let the receiver run its boot sequence. Wait until the
screen displays the Windows Mobile 6.5 Start screen.
[8]
