Engl
ish
23
Using MobileMapper Field Software
Installing
MobileMapper
Field
This section describes how to install MobileMapper Field
from the CD provided, using an office computer.
If Windows XP (or older OS version) is used on your computer,
you first need to install Microsoft Active Sync on your office
computer.
If Vista is used, you don’t normally need to install an
additional program on your computer. However, if the
installation of the MobileMapper Field software fails, you will
have first to install Windows Mobile Device Center and then
resume the installation of MobileMapper Field.
The latest versions of ActiveSync and Device Center can be
downloaded from http://www.microsoft.com/windowsmobile/
activesync/default.mspx at no cost. ActiveSync 4.5 and
Device Center 6.1 can be installed directly from your
MobileMapper Field CD.
If you are upgrading MobileMapper FIeld, Ashtech
recommends you first uninstall the previous version of
MobileMapper Field from the receiver using
Start
,
Settings
,
System
,
Remove Programs
.
Installation Procedure
•
Place the receiver on the docking station.
•
Connect the
docking station
to your office computer using
the USB data cable provided.
•
Turn on the receiver.
•
Insert the MobileMapper Field CD in your office computer.
This automatically starts the setup file stored on the CD.
•
Click on the
Install MobileMapper Field
option. This starts
the MobileMapper Field Setup Wizard.
•
Click
Next>
twice
.
•
Keep the default settings and just click
Next>
.
•
Confirm installation by clicking
Next>
again. The wizard
starts copying the
Ashtech Required Data
files to the
receiver. At the end of this phase, a message window
appears asking you to check your mobile device screen to
see if additional steps are needed to complete the
installation.
•
The receiver asks you to confirm the location where to
install
Ashtech Required Data.CAB
(“Device” is the
default choice).
Choose the option offering the largest
memory size.