Engl
ish
45
•
Later when you are ready to resume data logging, go back
to where you left the line or polygon, tap
Menu
>
Resume
to
continue the data logging as you walk along the feature.
Double Logging
While logging a line or polygon, you may want to log another
feature found along the way, whether a point, a line or a
polygon. Follow the instructions below.
•
Tap
Menu
>
Pause
to pause the data logging of the feature
in progress.
•
Move to the second feature you want to log.
•
Tap
Log
, select the layer of the second feature, make the
necessary settings and log this feature as you would in the
usual case.
•
Tap
Menu
>
Stop
when you are finished with the logging of
the second feature.
•
Go back to where you left the first feature.
•
Tap
Menu
>
Resume
to continue with the logging of the first
feature.
•
Tap
Menu
>
Stop
when you are finished with the logging of
the first feature.
More about Feature Logging
•
The number of point features that can be logged in a
session is only limited by the memory capacity of the
storage medium used.
•
Up to 10,000 points can be logged in a single line or
polygon.
•
When logging a long line or polygon, MobileMapper Field
will automatically save the data to a temporary file every
10 minutes of data logging.
If a power failure occurs while logging a line or polygon,
the feature is automatically saved before the power
failure. Because line and area features are saved
automatically every 10 minutes of actual logging, if a
power failure occurs unexpectedly and you have been
logging a line or polygon feature for the last 15 minutes,
then most probably only the first 10 minutes of the feature
will be saved.
•
If MobileMapper Field fails to save a feature because
there is not enough memory left, you can still delete
unnecessary files and try again. Follow the instructions
below when this happens.
– Minimize MobileMapper Field