ASENWARE Addressable Fire Alarm Control Panel User Manual Download Page 7

Page: 7 / 66

ASENWARE LTD.

1.3 DISPLAY AND FUNCTION KEYS

Large display screen makes the panel easily programmable,

below Figure 1.1 shows LED indicators and functions keys

available

1.3.1 Liquid Crystal Display

It displays all programming screens, as well as events, history,

device and other information. At normal condition it displays Fire,

Fault , Supervisory and general information. Mosts Recent
events are displayed on the 7” touchscreen LCD. Effortless
programming can be performed using alphanumeric keyboard.

1.3.2 Fixed Function Keys

Reset

Press RESET to eliminate all current alarms and reboot the system. The whole process takes 30-

60s.RESET clear all latched alarms and other events as well as turn off event LEDs. If alarms or

other off-normal events exist after reset, they will resound the system and relight the LEDs.

Evacuate

Press this key, holding it down for 2 seconds, to activate all silenceable fire output circuits.

Panel Buzzer Silence

By pressing this key, the panel sound will be silenced but LED will keep open.

Remote Sounder Silence

By pressing this key, it will silence all Notification Appliances.

Test

For Lamp Test, press this key to test the LED indicators on the left of the keypad, the panel circuit
LEDs

Summary of Contents for Addressable Fire Alarm Control Panel



































































Search results

Summary of Contents for Addressable Fire Alarm Control Panel

Reviews:

Related manuals for Addressable Fire Alarm Control Panel

Brands by name

Popular brands

ASENWARE Addressable Fire Alarm Control Panel, User Manual

Search results

Summary of Contents for Addressable Fire Alarm Control Panel

Reviews:

Related manuals for Addressable Fire Alarm Control Panel

Brands by name

Popular brands