ASENWARE LTD.
25
3.3.1
Program
Program of the panel allows the user to make the programming as a whole for the system.
When the user entered the
MENU
soft touch key, he/she can enter other sub-menus as described
in
2.2.3
.
Figure 3.1 Main Menu Screen
3.3.1.1
Status and Operation
STATUS & OPERATION
sub-menu allows the user to check the status of each address with
location information. It can be seen from the Figure 3.2, that it is possible to test and isolate the
individual device from this sub-menu.
In the Figure 3.2, column 1 tells about the address of the device and subsequent columns
about device types, location and zone number. It is possible to Test and Disable the individual
device using ON/OFF slide touch switch as shown in the last two columns, respectively. To check
the status for particular loop can be selected from the Loop number at the top on the left side of
this window, green right click implies the current selected loop. Pressing the soft touch button
particular loop can be selected or dis-selected. Status also shows, if particular device is in normal
condition or having any fault. UP/DOWN arrow can be used to go to next page, or page number
can be selected from the bottom left Page Selection touch button.
Summary of Contents for Addressable Fire Alarm Control Panel
