ASENWARE LTD.
22
2.3.5
Disable and Testing Event
2.3.5.1
Disablement and Testing of Device
When any point (detector or module) is isolated (disabled) or being tested individually, control
panel indicates disabled points or testing condition by displaying on the screen its disabled or
testing condition, respectively. It will not cause any alarm and if more than one point is disabled
or tested, most recent one will be on top.
2.3.5.2
Disablement and Testing of Zone
When the complete zone(s) is(are) being disabled and tested, control panel indicates disabled
points or testing condition by displaying on the screen disabled or testing condition, respectively.
•
Yellow
General Disable LED ‘ON’ for disablement of zone or any device disablement
•
Yellow
Test
LED ‘ON’ for testing of zone or any device
•
Display the message on
GENERAL Window
for the zone or device testing or disablement
condition e.g. if zone 5 is disable, “Zone 5 is disable” will appear on the screen.
Note : Settings and procedure for testing and disablement are described in subsequent chapters
2.4 PRINTING REPORTS
Printing report can be obtained (if printer installed ), which gives the information of all events
occurred. Owner can keep the records for future analysis as History can store up to 1000 fire
events.
Summary of Contents for Addressable Fire Alarm Control Panel
