Aseko ASIN AQUA, User Manual

Page: 18 / 36

EN 18
Setting Values
Commissioning procedure
1. Ensure the fi ltration system runs NONSTOP
for 24 hours
• Set the required values via the main screen by pressing the appropriate tab
(see the chapter Control):
• If you have the CLF probe, set the disinfection to 0.0 mg/l. If you have the
REDOX probe, set the disinfection to 000 mV.
• pH values leave at the factory setting for the time being (pH 7.0).
2. Close the water supply to the probes
ASIN AQUA Net displays „No water supply to the probes“ notifi cation.
3. Perform superchlorination
Perform superchlorination of pool water with Super CHLOR
(inorganic active chlorine without stabilizers). Follow the instructions
on the packaging (1 kg = 80 m³).
Choosing the disinfection probe
1. CLF free chlorine probe
Free chlorine measurement, CHLOR PURE dosing
2. Redox probe of the RX potential
Measurement of redox potential, CHLOR PURE dosing
DOSE ml/m
3
time dose per hour
Without a probe
SWIMMING POOL WATER
ASIN AQUA must be installed on fresh water reated by ter INORGANIC
superchlorination agent ( SUPERCHLOR # 13120).
Do not use organic chlorine!
Ensure that the water in the pool DOES NOT CONTAIN STABILIZERS
(CYANURIC ACID) and other impurities!