EN
24
Choosing the disinfection
probe
1.
CLF free hlorine probe
Free chlorine measurement, CHLOR PURE dosing
2.
Redox probe
of the RX potential
Measurement of redox potential, CHLOR PURE dosing
Commissioning procedure and
required value setting
Commissioning procedure
The water in the pool must be clean without any additives.
Ideally fill the pool with fresh water from the water main.
•
Ensure the filtration system runs NONSTOP for 24 hours
•
Turn on the filtration on NONSTOP 24 hours
•
If you have the CLF probe, set the disinfection to 0.0 mg/l.
If you have the REDOX probe, set the disinfection to 000 mV.
Close the water supply to the probes
ASIN AQUA displays no flow to the probes.
Perform superchlorination
Perform superchlorination of pool water with Super CHLOR (inorganic active
chlorine without stabilizers).
Follow the instructions on the packaging (1 kg = 80 m
3
).
OPEN
CLOSE
CLOSE
SuperCHLOR
#13120
Summary of Contents for ASIN AQUA Home VS
Page 42: ...CS 42...
Page 43: ...CS 43...
Page 44: ...www asekopool com ASIN AQUA Home VS USER MANUAL EN...
