ASEA AC15QTP Operation Manual Download Page 6

Page: 6 / 62

AC15QTP And AC20QTP Operations Manual....

SAFETY NOTICES

Each shore power converter is capable of transferring very large amounts of electrical energy

very quickly. This quality is fundamental to a high performance power converter. International

symbols are used throughout this manual to stress important information. Read the text below

each symbol carefully and use professional skills and prudent care when performing the actions

described by the text.

THE CAUTION SYMBOL (TRIANGLE ENCLOSING AN EXCLAMATION POINT)

INDICATES A CONDITION THAT COULD SERIOUSLY DAMAGE EQUIPMENT

AND POSSIBLY INJURE PERSONNEL. CAUTIONS WILL BE PRESENTED IN THIS

FORM. ALL CAUTIONS SHOULD BE RIGOROUSLY OBSERVED.

THE WARNING SYMBOL (TRIANGLE WITH A LIGHTNING BOLT) IS USED TO

SIGNAL THE PRESENCE OF A POSSIBLE SERIOUS, LIFE THREATENING

CONDITION. A CONDITION THAT IS HAZARDOUS TO BOTH PERSONNEL AND

EQUIPMENT WILL BE ISSUED AS A WARNING. ALL WARNINGS WILL BE

PRESENTED IN THIS FORM.

Summary of Contents for AC15QTP































































Search results

Summary of Contents for AC15QTP

Reviews:

Related manuals for AC15QTP

Brands by name

Popular brands

ASEA AC15QTP, Operation Manual

Search results

Summary of Contents for AC15QTP

Reviews:

Related manuals for AC15QTP

Brands by name

Popular brands