ASEA AC15QTP Operation Manual Download

Page: 31 / 62

AC15QTP And AC20QTP Operations Manual....

6.3

AUTO-RESTART FEATURE

The Auto-Restart feature will safely and automatically bring the shore power converter back on-

line following a power failure and recovery event. Highlights include:



Automatically routes power from the dock to the ship’s power buss.



Front panel controls allow auto-restart to be enabled or disabled.



Auto-Restart status displayed on the LCD STATUS screen.



Fault tolerant to guarantee safe operation.



Valid shore power verified prior to restart.



Handles repeated power failures without operator intervention.



LETHAL VOLTAGES ARE AUTOMATICALLY ROUTED WITHIN THE

CONVERTER WHEN (1) INPUT POWER IS PRESENT, (2) THE

DISCONNECT SWITCH IS IN THE “ON” POSITION, AND (3) AUTO-

RESTART IS ENABLED.



LETHAL VOLTAGES WILL BE AUTOMATICALLY ROUTED TO THE

CONVERTER OUTPUT AND THE OUTPUT CONTACTOR WILL

AUTOMATICALLY CLOSE

WHEN (1) INPUT POWER IS PRESENT, (2)

THE DISCONNECT SWITCH IS IN THE “ON” POSITION, AND (3)

AUTO-RESTART IS ENABLED.



NEVER REMOVE ANY PANELS OR COVERS WITHOUT SECURING

(REMOVING) SHORE POWER WHEN AUTO-RESTART IS ENABLED.



NEVER PERFORM MAINTENANCE OR SERVICE WHILE AUTO-

RESTART IS ENABLED.



NEVER ASSUME AUTO-RESTART IS DISABLED.



NEVER USER THE DISCONNECT SWITCH TO TURN THE

CONVERTER OFF WITH AUTO-RESTART ENABLED. THE

CONVERTER CANNOT DISTINGUISH BETWEEN A VALID POWER

FAILURE AND IMPROPER USE OF THE DISCONNECT SWITCH.

Summary of Contents for AC15QTP































































Search results

Summary of Contents for AC15QTP

Reviews:

Related manuals for AC15QTP

Brands by name

Popular brands

ASEA AC15QTP, Operation Manual

Search results

Summary of Contents for AC15QTP

Reviews:

Related manuals for AC15QTP

Brands by name

Popular brands