125
Troubleshooting
ACK-E-2009
By means of diagnostic
fl
ow chart:
Generally, there are two kinds of problems, i.e. starting failure and insuf
fi
cient cooling/heating. “Starting failure”
is caused by electrical defect while improper application or defects in refrigerant circuit causes “Insuf
fi
cient
cooling / heating”.
i ) Diagnosis of Electric circuit
: Faulty
: Check
: Cause
: Remedy
No cooling/heating (Unit fails to start)
No voltage or low voltage
Wrong phase/missing
phase
Components shorted
Connections loose
High or low voltage
Wrong phase/missing
phase
Faulty
Blown
Tripped
Coil burnt
Contact faulty
Faulty
Faulty fan motor
Defective operation switch
Evaporator
fan contactor
Overcurrent
relay for
evaporator
fan
Fuse for
operation
circuit
Unit power
supply
Condenser
fan motor
Evaporator
fan motor
Overcurrent
relay for
condenser
fan
Running
2
1
High voltage or low voltage
Wrong phase/missing
phase
Tripped
Get the right voltage
Repair the power line
Repair or replace the components
Tighten the connections
Get the right voltage
Check the power supply to the
motor: repair when necessary
Change the contactor
Repair or change the motor
Repair the contacts
Repair or change the switch
Get the right voltage
Check the power supply to the
motor: repair when necessary
Stop
Running
Stop
13_Troubleshooting_A.indd 125
13_Troubleshooting_A.indd 125
4/6/2009 11:17:11 AM
4/6/2009 11:17:11 AM