Ascon Tecnologic Srl - X33H
– OPERATING INSTRUCTIONS – MX33HENG00 - PAGE 1
X33H
TEMPERATURE AND HUMIDITY
REGULATOR WITH
PROGRAMMABLE CYCLES AND
DEFROST COMMAND
OPERATING INSTRUCTIONS
Code: MX33HENG00
Ascon Tecnologic Srl
VIA INDIPENDENZA 56
27029 VIGEVANO (PV) ITALY
TEL.: +39 0381 69871
FAX: +39 0381 698730
Internet: http:\\www.ascontecnologic.com
e-mail: info@ ascontecnologic.com
INTRODUCTION
This
manual
contains
the
information
necessary for the correct installation, and the
instructions for the use and maintenance of the
product; the user is advised to read it carefully
and conserve it for reference.
This publication is the exclusive property of
Ascon Tecnologic Srl; unless expressly
authorized, reproduction and disclosure of even part of its
contents is strictly prohibited.
Ascon Tecnologic Srl reserves the right to make visual and
functional modifications to this manual at any moment and
without advance warning.
In the event that a fault or malfunction of the device should
create hazardous or damaging situations for persons, property
or animals, note that the system must be fitted with additional
devices aimed at guaranteeing safety.
Ascon Tecnologic Srl and its legal representatives shall accept
no responsibility for any damage caused to persons, property
or animals deriving from tampering, improper or erroneous
usage, or use that is not in conformity with the specifications
of the appliance.
INDEX
1
DESCRIPTION OF THE APPLIANCE
1.1
GENERAL DESCRIPTION
1.2
DESCRIPTION OF THE FRONT PANEL
2
PROGRAMMING
2.1
RAPID SETTING OF THE SET POINTS
2.2
STANDARD PROGRAMMING OF THE PARAMETERS
2.3
RAPID PROTECTION OF THE PARAMETERS BY
MEANS OF PASSWORD AND KEYPAD LOCK
2.4
PROGRAMMING OF THE CUSTOMIZED
PARAMETERS AND LEVELS OF PARAMETER
PROGRAMMING
2.5
CONFIGURATION OF THE PARAMETERS WITH “A01”
2.6
KEYPAD LOCK
3
WARNINGS FOR INSTALLATION AND USE
3.1
PERMITTED USE
3.2
MECHANICAL INSTALLATION
3.3
ELECTRICAL CONNECTIONS
3.4
ELECTRICAL WIRING DIAGRAM
4
OPERATION
4.1
ON / STAND-BY FUNCTION
4.2
CONFIGURATION OF THE INPUTS, MEASUREMENT
AND DISPLAY
4.3
CONFIGURATION OF THE OUTPUTS
4.4
TEMPERATURE REGULATOR
4.5
HUMIDITY REGULATOR
4.6
RELATIONSHIPS BETWEEN CONTROL OF
TEMPERATURE AND DEHUMIDIFICATION
4.7
COMPRESSOR PROTECTION AND OUTPUT DELAY
FUNCTIONS
4.8
DEFROST CONTROLLER
4.9
RECYCLING FAN CONTROL
4.10
AIR EXCHANGE FAN CONTROL
4.11
CELL LIGHT CONTROL
4.12
AUXILIARY OUTPUT CONTROL
4.13
ALARM FUNCTIONS
4.13.1
TEMPERATURE AND HUMIDITY ALARMS
4.13.2
EXTERNAL ALARM
4.13.3
DOOR OPEN ALARM
4.13.4
ALARM MEMORY
4.14
OPERATION OF “U”, “UP/F1, AND “DOWN/F2” KEYS
4.15
DIGITAL INPUTS
4.16
WORK CYCLES AND DESCRIPTION OF TWO
TYPICAL APPLICATIONS
4.16.1
CONTROL FOR APPLICATIONS ON “LEAVENING-
RETARDING / LEAVENING” CABINETS
4.16.2
CONTROL FOR APPLICATIONS ON “CURING” CELLS
5
TABLE OF PROGRAMMABLE PARAMETERS
6
PROBLEMS, MAINTENANCE AND GUARANTEE
6.1
SIGNALS
6.2
CLEANING
6.3
GUARANTEE AND REPAIRS
7
TECHNICAL SPECIFICATIONS
7.1
ELECTRICAL SPECIFICATIONS
7.2
MECHANICAL SPECIFICATIONS
7.3
MECHANICAL DIMENSIONS
7.4
FUNCTIONAL SPECIFICATIONS
7.5
APPLIANCE MODEL CODES
1 - DESCRIPTION OF THE APPLIANCE
1.1 - GENERAL DESCRIPTION
Model X33H is a regulator with microprocessor dedicated to
controlling temperature and humidity.
Given its ability to manage programmable work cycles and its
defrost control, it is typically used for controlling curing cells,
leavening-retarding cabinets, climatic chambers and many other
applications.
The appliance is fitted with up to 4 relay outputs, 3 inputs for PTC or
NTC temperature sensors (2 of which can also be used as digital
inputs), 1 input for 0/4..20 mA humidity sensors, and a digital input,
all of which are completely configurable.
