IRD1560 Decoder User Manual
ASI Output Select
: The TS content output through ASI is copied from the one of the IP
streams (MPTS and SPTS 1-8). Users can select one stream from the pull-down list.
After finishing the configuration, click
to confirm.
Parameters
→
Mux:
Click “Mux” and it displays the interface where users can multiplex programs and modify
program info. The selected programs will output in TS form through IP and ASI ports. (Figure
4-9)
Configure ‘Input Area’ and ‘Output Area’ with buttons in ‘Operation Area’. Instructions are as
below:
: To enable/disable the PID remapping
: To refresh the input program information
: To refresh the output program information
Operation Area
Input Area
Output Area
Solutions Provider for FTTx, RFoG, and HFC
www. ascentcomtec.com
Page 36 of 46
