IRD1560 Decoder User Manual
Switch on the device and after a few seconds’ initialization, it presents start-up pictures as
below:
HD IRD
: Device’s name
Bitrate: xx.xxx MHz
indicates the current effective bitrate multiplexed output.
Press LOCK key on the front panel to enter the main menu. The LCD will display the following
pages where user can configure the parameters for the device:
User could do all the settings according to the 8 directions displayed on the LCD. User can
press UP/DOWN buttons to specify menu item, and then press ENTER to enter the submenus
as below:
Alarm:
The alarm indicator will turn on if there are no A/V signals inputting or outputting bit
rate overflows. User then can enter this menu to check the error type. Otherwise it shows the
‘system is normal’.
Uptime:
It displays the working time duration of the device. It times upon power on.
Start up…
Start OK…
HD IRD
Bitrate: xx.xxx Mbps
Main menu
1 Status
2 Input Sets
3 CI Card
4 TS Config
5 Decoder
6 IP Stream
7 Network
8 System
Alarm
System is normal
Solutions Provider for FTTx, RFoG, and HFC
www. ascentcomtec.com
Page 17 of 46
