IRD1560 Decoder User Manual
In addition to using front buttons to control the device, users can also control and set the
configuration with the web Brower in the PC.
The default IP address of this device is 192.168.0.136. (We can modify the IP through the
front panel.)
Connect the PC (Personal Computer) and the device with net cable, and use ping command to
confirm they are on the same network segment.
I.G. the PC IP address is 192.168.99.252, we then change the device IP to 192.168.99.xxx (xxx
can be 1 to 254 except 252 to avoid IP conflict).
Use web browser to connect the device with PC by inputting the device’s IP address in the
browser’s address bar and press Enter.
It will display the Login interface as Figure-1. Input the Username and Password (Both the
default Username and Password are “admin”.) and click “LOGIN” to start the device setting.
Summary:
When we confirm the login, it displays the WELCOME interface as Figure 4-2 where users can
have an overview of the device’s system information and working status.
Solutions Provider for FTTx, RFoG, and HFC
www. ascentcomtec.com
Page 28 of 46
