IRD1560 Decoder User Manual
Parameters
→
TS Config:
From the menu on left side of the webpage, clicking “TS Config”, it displays the interface
where users can configure the ASI output parameters. (Figure 4-8)
Output TS Mode:
Number before slash indicates the programs which have been descrambled.
Number behind slash indicates the whole programs from the selected channel.
Users can also read the program information by clicking ‘+’ symbol.
Configure TS ID and ON ID here for the output stream.
Under this mode, users can randomly select programs from any input channel to mux out.
To passthrough programs from Tuner 1/2
To passthrough programs from ASI
To passthrough programs from IP
Solutions Provider for FTTx, RFoG, and HFC
www. ascentcomtec.com
Page 35 of 46
