AP224S GPON HGU User Manual
Figure 4-34: VoIP information
HGU supports wireless access service. This example introduces how to configure WLAN
service when HGU works in Route mode.
1.
HGU works in Route mode, HGU receives IP by DHCP mode, VLAN ID is 11.
2.
Only enable SSID 1, its name is “xyz”. Network authentication method is WPA-PSK, and
encryption method is TKIP+AES.
Before configuring, make sure HGU has been successfully registered and authorized.
Connect PC to one of the HGU’s LAN ports with a twisted cable.
1.
Add a WAN connection
Choose “Network > Internet > Internet” in the navigation menu. Add a bridge mode WAN
connection using the following parameters:
Obtain IP address by DHCP.
Enable VLAN with VLAN ID as 11.
Service mode is INTERNET and bind SSID1.
Keep other parameters default.
Solutions Provider for FTTx, RFoG and HFC www.ascentcomtec.com
Page 73 of 79
