AP224S GPON HGU User Manual
There are two configuration methods for internet service: bridge mode and route mode.
1.
HGU works on bridge mode, service VLAN is 9. Users access the Internet via LAN port 1.
2.
HGU works on route mode, service VLAN is 10. HGU receives IP address via DHCP.
Before configuring, make sure the HGU has been successfully registered and authorized.
Connect PC to one of the HGU’s LAN ports with a twisted cable.
Bridge Mode for Internet Service
3.
Add a WAN connection
Choose “Network > Internet > Internet” in the navigation menu. Add a bridge mode WAN
connection with the following parameters:
Mode is bridge.
Enable VLAN and VLAN mode is transparent.
Service mode is OTHER.
Bind port 1.
Keep other parameters default.
Figure 4-1: Add a bridge WAN connection
Solutions Provider for FTTx, RFoG and HFC www.ascentcomtec.com
Page 50 of 79
