AP224S GPON HGU User Manual
1.
Configure LAN port
Choose “Network > Internet > LAN VLAN” in the navigation menu. Enable VLAN mode of
LAN1, received VLAN is 0 and translation VLAN is 9.
Figure 4-2: LAN VLAN settings
2.
Access the internet
Connect PC to LAN 1 port. After receiving an IP address from a DHCP server in the network,
the PC can access the Internet.
Route Mode for Internet Service
1.
Add a WAN connection
Choose “Network > Internet > Internet” in the navigation menu. Add a route mode WAN
connection using the following parameters:
Protocol mode is IPv4.
Choose DHCP.
NAT function is checked.
Enable VLAN with VLAN ID as 10.
Service mode is INTERNET.
Bind port 1.
Keep other parameters default.
Solutions Provider for FTTx, RFoG and HFC www.ascentcomtec.com
Page 51 of 79
