AP224S GPON HGU User Manual
Figure 1-2: Application Chart
Interface Panel
Figure 1-3: Interface panel
Name
Function
PON
Connect PON port to the internet using an SC type single-mode optical fiber cable
Phone 1/2
Connect a telephone with the FXS port using a telephone wire. If you only have
one telephone, you should use the FXS1 port
LAN 1/2/3/4
Connect the LAN ports to your devices using RJ45 Ethernet cables
WPS
Press down Wi-Fi turn on/off for 3 seconds to enable/disable WiFi
WiFi
Hold down the reset button for 1 to 5 seconds to make the device restart and
recover from the factory default settings
Reset
Press down the WPS button for 0.1 to 3 seconds to activate the WPS function
DC12V
Connect with power adapter
PWR
Turn power on/off
CATV
SCTE type F TV antenna
Solutions Provider for FTTx, RFoG and HFC www.ascentcomtec.com
Page 6 of 79
