Refresh:
getting PID filter table from the device
Confirm:
submitting the PID filter table to the device
Check all:
selecting all the selections of the list
After user selects one PID in the table, then the corresponding output PSI/SI table will not be sent
to the output stream.
8.2.3.2.
PID Pass
User can decide to bypass the inputting PID as needed in this interface.
In some occasions, there are some PIDs which won’t belong to any program, such as EPG, NIT
tables, and so on, but user just wants to pass them through the multiplexing module without
changing anything. This is the main purpose of this function.
The display will show as below when user clicks “Add” button.
Solutions Provider for FTTx, RFoG and HFC www.ascentcomtec.com
Page 79 of 89
