5.2.5
Edit Equipment Interface
Users should follow the steps as below:
Input the device IP Address
Input the port
Input the Equipment Name
Choosing the connected equipment type in drop down list of
Equipment Type
by clicking the
“
▼
” Or Click “
?
” to auto search the type of device.
NOTE:
1.
The default IP of the EC2200 SD Encoder is 192.168.2.136. You can check its IP address in the
front panel of device in case the IP has unexpectedly changed.
2. The PC IP address and device IP address should be in the same network. For example the Device
IP is 192.168.2.136, sub mask is 255.255.255.0. So the PC IP address should be 192.168.2.X
(1<X<255), sub mask is 255.255.255.0. User can use ping command to confirm these two are
in same network or not.
Click OK, it will appear as below:
Solutions Provider for FTTx, RFoG and HFC www.ascentcomtec.com
Page 48 of 89
