5.3.1.2.
Video Parameters
NOTE:
1.
Bit Rate Mode & Max Video Bit rate
Users can only modify the Max Video Bit Rate when the Bit rate mode is VBR, while CBR mode is
selected, Max Video Bit Rate box turns gray and users can just check it.
2.
If any parameter is modified, it is supposed to click
Set
to make the modified
parameters activate and click
Get
to read and effect the current device’s activating
parameters.
Input channel selection area. The interface and
setting principle of each channel are the same.
User can set
the mode or
type of each
item by
clicking the
Radio Box
under the
correspondin
g item.
User can
set the
standard or
format of
each item in
this area by
clicking the
pull-down
trigger.
User can set the parameters of the
video brightness, contrast,
saturation, and Hue by moving
respective slider. Figures at the
beginning and end indicate the
adjustment range.
Solutions Provider for FTTx, RFoG and HFC www.ascentcomtec.com
Page 54 of 89
