4.2.1.3.
System Settings
Under this interface, users can set the corresponding system parameters, after the modification,
users can press
ENTER
key to take the modification into effect.
Program Number Setting
Users can set the program number by pressing ENTER to enter this submenu. The LCD will display
as below:
Video/Audio/PMT/PCR PID Settings
Users can set these parameters by pressing ENTER to enter these submenus. The LCD will display
the following pages, and the maximum PID number cannot exceed 0x1fff.
1.1.3.2 Video PID
0x0101
1.1.3.3 Audio PID
0x0102
►
1.1.3.1 Prog Number 1.1.3.2 Video PID
1.1.3.3 Audio PID 1.1.3.4 PMT PID
►
1.1.3.5 PCR PID 1.1.3.6 IP Enable
1.1.3.7 Out Address 1.1.3.8 Out Port
►
1.1.3.9 Null PKT
1.1.3.1 Program Number
0x0101
Solutions Provider for FTTx, RFoG and HFC www.ascentcomtec.com
Page 37 of 89
