2.5.3
ASI output interface connection
User can first find the ASI output interface on the device according to the connector mark
described on the rear panel illustration, and then connect the ASI cable (in the accessories). One
end is connected to the encoder’s ASI out connector (ASI out1, ASI out2) while the other end to
the TS stream multiplexer or modulator’s ASI input port. The encoder’s ASI output interface and
its connection are illustrated as follow:
2.5.4
IP Output Interface connection
Users can first find the DATA interface on the device according to the connector mark described
on the rear panel illustration, and then connect the network (CAT5). One end of the network cable
is connected to the encoder’s DATA output connector, while the other end to the TS stream
multiplexer IP input port or other device which can input IP signal. The encoder’s DATA connection
is illustrated as follows:
2.5.5
NMS Connection
Users can first find the NMS interface on the device according to the connector mark described
on the rear panel illustration, and then connect the network cable (CAT5). One end of the network
Solutions Provider for FTTx, RFoG and HFC www.ascentcomtec.com
Page 18 of 89
